Skip to content Skip to footer
Menu
  • Services Overview
    • E-Beam Sterilization
      • Tissue and Biologics
      • Medical Devices
      • Surgical Gowns
    • Polymer Modification
      • Cable and Wire Crosslinking
      • Foam
    • Advanced R&D
  • Resources
  • Blog
  • About
  • Careers
Contact m
  • Contact Us

Author: ebeam

Crosslinking & Polymer Modification Processing Capabilities Sterilization Sterilization Processing Capabilities

How does an electron beam accelerator work?

May 20, 2014 / July 31, 2020 by ebeam

There are several different methods to accelerate electrons to form a beam. The accelerators used by E-BEAM Services are direct current, which provide a continuous versus a pulsed beam. As an example, our accelerators operate in the same way as a traditional cathode ray television set.

Read more »

Cost Crosslinking & Polymer Modification Sterilization Processing Capabilities Wire, Cable, & Tubing

What factors affect the price of e-beam crosslinking of cable jacketing?

May 15, 2014 / October 9, 2025 by ebeam

To answer this question we have to discuss some of the practical considerations in the e-beam irradiation process. In general, the cost associated with the processing of cable is time—the time it takes to process a reel and the time it takes to splice or change over to the next reel.

Read more »

Crosslinking & Polymer Modification Product Qualification Wire, Cable, & Tubing

How do I develop a new electron beamed crosslinkable cable jacketing compound?

April 23, 2014 / August 24, 2020 by ebeam

Compound formulations are best developed by those with the experience with such chemistry, such as specialists like AlphaGary, Gendon, Inhol, Saco, and others. While E-BEAM Services does not develop compounds, we can definitely help with the testing and product qualification process.

Read more »

Processing Capabilities Product Validation Sterilization

How do I know if my health care product is compatible with e-beam radiation?

April 17, 2014 / August 24, 2020 by ebeam

Often, the first step in the qualification process is to determine the compatibility of your product with e-beam radiation. Some materials can experience a change in their properties with e-beam, so it is important to ensure the stability of your material and packaging at the beginning of the qualification process. Some initial guidance can be […]

Read more »

Crosslinking & Polymer Modification Sterilization Processing Capabilities Wire, Cable, & Tubing

What sizes of cable can be electron beam crosslinked?

April 8, 2014 / August 24, 2020 by ebeam

E-BEAM Services can process many different cable sizes and constructions. We process thin gauge wire, down to 15 AWG (0.057 inch diameter), but also large cables over 2 inches in diameter. The thickness of the cable jacketing is also important to consider.

Read more »

Processing Capabilities Sterilization

Why do companies choose electron beam irradiation to sterilize their products?

April 2, 2014 / August 24, 2020 by ebeam

Electron beam radiation has been used for more than half a century to sterilize medical devices due to several key benefits, including: low cost, high reliability, turnaround time, safety, and relative ease of validation.

Read more »

Crosslinking & Polymer Modification Molded Parts Product Qualification Property Improvements Wire, Cable, & Tubing

How do I know my part has been effectively crosslinked?

March 27, 2014 / August 24, 2020 by ebeam

When most of our customers come to us, they have a specific property improvement in mind. Clients with a formed part may desire improved high temperature properties or improved tensile strength, while clients looking to improve the properties of polymers in pellet form may desire a specific melt index or melt strength.

Read more »

Crosslinking & Polymer Modification Processing Capabilities Sterilization Sterilization Processing Capabilities

Important Parameters of an Electron Beam – energy (MeV), current (mA) and line speed.

March 21, 2014 / September 5, 2025 by ebeam

The key parameters to control an electron beam accelerator are the energy, current and line speed of the process. The accelerators used by E-BEAM Services are similar to the old cathode ray tube (CRT) televisions. However, instead of operating at about 25,000 volts, our industrial electron beams can operate at up to 5,000,000 volts. The […]

Read more »

Crosslinking & Polymer Modification Processing Capabilities Sterilization Sterilization Processing Capabilities

Can e-beam really penetrate my product – I mean, isn’t it just a surface treatment?

March 14, 2014 / August 28, 2020 by ebeam

I have been asked, or even been told, that e-beam is “only a surface treatment and can’t get through any more than a piece of paper.” Wrong. For decades, e-beam has been used to sterilize whole cases of medical devices, such as those in the picture below. Thousands of truckloads are contract-sterilized by e-beam each […]

Read more »

Crosslinking & Polymer Modification Molded Parts Sterilization Processing Capabilities

What size of parts can I have e-beam crosslinked?

March 4, 2014 / September 3, 2020 by ebeam

The first thing to consider is that the parts are transported through the e-beam on a conveyor system using carts with the beam shooting down and through the parts. These carts vary in size. In New Jersey the carts measure 60 x 48 inches and in Ohio they measure 98 x 52 inches. In addition

Read more »

Page navigation
  • «
  • ‹
  • Page 13
  • Page 14
  • Current Page 15
  • Page 16
  • ›
Sidebar
Categories
  • Crosslinking & Polymer Modification
  • Crosslinking Resources
  • E-Beam
  • FAQ Resources
  • New Jersey Careers
  • Ohio Careers
  • Sterilization
  • Sterilization Resources
FOLLOW US
Contact Us

Lebanon, OH

1-513-933-0031

Cranbury, NJ

1-609-655-7460