What sizes of cable can be electron beam crosslinked?

E-BEAM Services can process many different cable sizes and constructions. We process thin gauge wire, down to 15 AWG (0.057 inch diameter), but also large cables over 2 inches in diameter. The thickness of the cable jacketing is also important to consider. In almost all cases, the cable jacket itself must be crosslinked while the rest of the construction does not require treatment. Using a typical jacket compound density of 1.3 g/cm3 as an example, E-BEAM Services can crosslink a 2 inch diameter cable with 0.200 inch jacket thickness.

Different Cables

For specific information on our handling equipment restrictions, please review our reel-to-reel capabilities data sheet which lists specific limitations for our three locations.

Give us a call to find out if we are a good fit to crosslink your current cable products!

Karen with Signature III

 

 

 

www.ebeamservices.com • Ohio (513) 933-0031 • New Jersey (609) 655-7460

This entry was posted in Crosslinking & Polymer Modification, Processing Capabilities, Wire, Cable, & Tubing. Bookmark the permalink. Both comments and trackbacks are currently closed.