Skip to content Skip to footer
Menu
  • Services Overview
    • E-Beam Sterilization
      • Tissue and Biologics
      • Medical Devices
      • Surgical Gowns
    • Polymer Modification
      • Cable and Wire Crosslinking
      • Foam
    • Advanced R&D
  • Resources
  • Blog
  • About
  • Careers
Contact m
  • Contact Us

Category: Sterilization

E-Beam Sterilization Sterilization Processing Capabilities

Cold Sterilization is an E-BEAM Specialty

September 29, 2015 / October 15, 2025 by ebeam

Sometimes customers have a special sterilization challenge–and e-beam sterilization provides the solution. For example, I recently worked with a customer whose product needs to stay refrigerated, but not frozen. The product degrades over time, and degrades even faster at higher temperatures. However, it is destroyed if it goes below freezing. E-BEAM cold sterilization with refrigeration […]

Read more »

E-Beam Sterilization

How E-BEAM Services assures compliance with ISO 13485

September 2, 2015 / May 15, 2020 by ebeam

E-BEAM establishes compliance with a standard such as ISO 13485 or ISO 9001 by reviewing the standard and determining if and how E-BEAM Services implements each section of the standard. If there is a gap between our Quality Management System (QMS) and a requirement of the standard, we assess the gap and implement procedures to […]

Read more »

Bioreduction Archive E-Beam

What is bioreduction and how does E-BEAM Services accomplish it?

July 8, 2015 / November 18, 2025 by ebeam

Bioreduction is a general term for reducing the number of microorganisms, or bioburden, in a product, sometimes referred to as “killing bugs.” Sterilization is a special case of bioreduction that has specific requirements set by a regulatory body such as the FDA. If a product is labeled as “sterile”, it must meet those requirements.

Read more »

Sterilization Sterilization Processing Capabilities

What is cold sterilization?

April 22, 2015 / October 15, 2025 by ebeam

Cold sterilization may be essential for certain: pharmaceutical products medical devices tissue samples biologics For products that contain heat-sensitive ingredients and yet require sterilization or bio-reduction treatments, cold sterilization provides protection via low temperature molecular stabilization.

Read more »

Product Validation Sterilization Sterilization Cost

Is my product compatible with e-beam sterilization? At what maximum dose?

February 3, 2015 / September 23, 2025 by ebeam

  Medical device manufacturers want to know if their product is compatible with e-beam sterilization; they can do it by performing a simple experiment. This experiment includes exposing a number of samples to a range of doses to see the effects of the radiation on their product materials and the packaging. Not only will the […]

Read more »

Sterilization

What Quality Systems are applicable for electron beam sterilization?

January 20, 2015 / September 23, 2025 by ebeam

E-BEAM Services’ Quality Systems meets the requirements set out by the US Food and Drug Administration (FDA), and our facilities are registered and audited by the FDA. We also work with customers that market their products in Europe, so we assure compliance with the EU Guidelines to Good Manufacturing Practice for Medicinal Products and the […]

Read more »

Product Validation Sterilization

What is a dosemap and what does it tell me?

December 2, 2014 / November 18, 2025 by ebeam

In electron beam processing, a dosemap measures the distribution of dose, typically within a case of medical devices to be sterilized. (The principles also apply to other types of electron beam processing.) We are usually looking to determine the maximum internal dose and the minimum internal dose.

Read more »

Processing Capabilities Sterilization Processing Capabilities

Do I have to build a certain pallet load for the e-beam process?

November 18, 2014 / October 15, 2025 by ebeam

The quick answer is NO!Unlike other sterilization methods, such as EtO and gamma, the e-beam process unloads pallets and places cases of product onto conveyer carts in a single layer.

Read more »

Sterilization

How is a sterilization dose measured in the e-beam irradiation process?

August 20, 2014 / July 24, 2020 by ebeam

Are you ready for the shocking truth? Truth is, we can’t actually guarantee sterility of any products we “sterilize.” Don’t panic just yet though! We are fully capable of certifying the dose the product received—the dose that you and your microbiological lab determined was needed to qualify your product as sterile.

Read more »

E-Beam Product Validation Sterilization Sterilization Cost

How do I validate my medical device for e-beam sterilization?

August 18, 2014 / October 9, 2025 by ebeam

To claim your product is sterile after e-beam treatment, you must perform several validation steps, as regulated by ISO 11137. This validation process is comparable to that of gamma sterilization and it is simpler than the process for ETO sterilization. If you do not have a microbiology lab in-house, you will need to partner with […]

Read more »

Page navigation
  • «
  • ‹
  • Page 5
  • Page 6
  • Current Page 7
  • Page 8
  • Page 9
  • ›
  • »
Sidebar
Categories
  • Crosslinking & Polymer Modification
  • Crosslinking Resources
  • E-Beam
  • FAQ Resources
  • New Jersey Careers
  • Ohio Careers
  • Sterilization
  • Sterilization Resources
FOLLOW US
Contact Us

Lebanon, OH

1-513-933-0031

Cranbury, NJ

1-609-655-7460