Category Archives: Bioreduction

How do I sterilize my labware?

By ebeam | Published: April 16, 2020

  This might be a trick question. Depending on its end use, sometimes labware doesn’t need to be sterilized. It needs to be bioreduced.

Also posted in E-Beam, Sterilization | Comments closed

What is the difference between Bioreduction and Sterilization?

By ebeam | Published: October 29, 2019

  One of the questions we get often is: What is the difference between bioreduction and sterilization? Check out the latest Crash Course above to find out!

Also posted in E-Beam, Sterilization | Comments closed

Crash Course Recap: What do I do if my packaging is too dense?

By ebeam | Published: September 24, 2019

  E-beam sterilization can be a good fit for a lot of different products, thanks to its fast dose rate and the fact that it doesn’t need a radioactive or carcinogenic source like some other sterilization options. But deciding to use e-beam is only the first step. Sometimes, existing packaging configurations are too dense to […]

Also posted in E-Beam, Processing Capabilities, Product Validation, Sterilization | Comments closed

E-BEAM does Boston (BIOMEDevice Boston, that is)

By ebeam | Published: April 17, 2018

This April will find the E-BEAM team enjoying all Boston has to offer: walking the Freedom Trail, checking out Fenway Park, and of course too many (is there such a thing?) cannoli at Mike’s Pastry. And one more thing: the BIOMEDevice Boston show, on April 18th-19th.

Also posted in E-Beam, Sterilization | Comments closed

At home with electrons

By ebeam | Published: September 14, 2016

At this point, if you’ve read through a number of our blog entries you might be thinking, “Okay, this electron beam thing is REALLY cool, but I’m not a medical device manufacturer or a resin supplier, so it doesn’t really affect me.” In actuality, you might be surprised to learn that products modified by electron […]

Also posted in Chain Scissioning, Crosslinking & Polymer Modification, E-Beam, Molded Parts, Property Improvements, Rheology Control, Sheet Processing, Sterilization, Wire, Cable, & Tubing | Comments closed

The Story of E-BEAM Services: Sterilization

By ebeam | Published: November 4, 2015

We are E-BEAM Services, we are committed to the power of electrons, and we are electron sterilization. In the video below, you will discover how E-BEAM Services has revolutionized the sterilization market with the power of electrons.     Transcript The story of E-BEAM Services is the story of commitment. Commitment to the power of […]

Also posted in E-Beam, Processing Capabilities, Product Validation, Sterilization | Comments closed

What is bioreduction and how does E-BEAM Services accomplish it?

By ebeam | Published: July 8, 2015

Bioreduction is a general term for reducing the number of microorganisms, or bioburden, in a product, sometimes referred to as “killing bugs.” Sterilization is a special case of bioreduction that has specific requirements set by a regulatory body such as the FDA. If a product is labeled as “sterile”, it must meet those requirements.

Also posted in E-Beam | Comments closed

What can I expect from E-BEAM as a company?

By ebeam | Published: August 15, 2014

Let me tell you a story. In June of 2013, I was standing in our booth at the MD&M show in Philadelphia when I turned to face a stately looking gentleman holding some sort of medical device in his hand. He was shaking his head, saying “you sterilization guys have a history of horrible service.” […]

Also posted in Chain Scissioning, Crosslinking & Polymer Modification, Molded Parts, Product Validation, Rheology Control, Sheet Processing, Sterilization, Wire, Cable, & Tubing | Comments closed

Ask a question

Categories